01Wireless Power Advisory · For Product Teams

Wireless Power Safety
& Integration Review

Beriven provides independent technical review for product teams integrating wireless power, helping identify architecture, safety, electromagnetic exposure, thermal, EMC, modeling, and regulatory-readiness risks before critical design decisions become costly to reverse.

WHO
Product teams integrating wireless power
RISKS
Architecture · safety · exposure · thermal · EMC · regulatory
ADJACENT CAPABILITY
Electromagnetic, multiphysics & UV-device modeling
Medical devices
Wearables · body-adjacent devices
Robotics · docking
Automotive interiors
Industrial IoT
Consumer electronics
Body-adjacent products
Regulated product teams
02The Problem

Wireless power is not a charging feature. It is a multi-domain integration risk.

On a block diagram, wireless power looks like a coil and a regulator. Inside a real product it is a coupled electromagnetic, thermal, mechanical, control, and regulatory problem — driven by coil geometry, shielding, alignment tolerance, operating frequency, foreign-object behavior, and the surrounding system stackup.

When the integration is wrong, it rarely fails quietly. It fails as a thermal exceedance late in qualification, an EMC margin issue at the test lab, an exposure question from a notified body, or a field issue that’s expensive to recall.

RISK · 01
Late-stage redesign

Architecture changes discovered after firmware lock, tooling commitment, sourcing, or validation can become significantly more expensive and disruptive to the development program.

RISK · 02
Failed compliance testing

Unanticipated EMC, exposure, or safety failures discovered at the certification lab, not in the design phase.

RISK · 03
Thermal & exposure exceedances

Coil and enclosure heating breaching contact-temperature limits; SAR or field exposure margins eroded.

RISK · 04
EMC & intra-system coupling

Coupling into nearby sensors, radios, and control loops — usually attributed to firmware before being traced to the coil.

03The Review

An independent technical review — before architecture lock-in.

The Safety & Integration Review evaluates a wireless power approach against its intended product, use environment, and regulatory pathway — and reports back in technical terms that engineering, leadership, and regulatory stakeholders can act on together.

It is performed by a single senior reviewer, scoped to land between concept and pre-compliance, and structured to surface risks while there is still time to redesign without disrupting the program.

FIG.01 · Engagement windowCONCEPT → PRE-COMP
EARLIEST
Concept
IDEAL
Prototype
LATEST
Pre-Comp
04Assessment Dimensions

Nine dimensions. One coordinated review.

Each dimension is examined against your product context and weighted by where it actually controls program risk — not by checklist.

Coil & couplingDIAG
User proximity & exposureDIAG
Thermal fieldDIAG
EMC coupling pathsDIAG
01 / 09ARC

Architecture fit

Coil topology, operating frequency, power class, alignment tolerance, shielding strategy, and system layout against the intended product envelope.

02 / 09SAF

Safety risk

Heating, foreign-object detection behavior, fault and misuse modes, user proximity, and body-contact scenarios.

03 / 09EMF

Electromagnetic exposure

Human exposure considerations, near-field hot zones, body proximity, and whether SAR or exposure modeling is warranted.

04 / 09THR

Thermal behavior

Coil heating, enclosure ΔT, contact-temperature limits, duty cycle margin, and product-use constraints.

05 / 09EMC

EMC & interference

Coupling paths into sensors, radios, control loops, and adjacent devices; conducted and radiated risk.

06 / 09REG

Regulatory readiness

Likely standards basis, expected test set, certification path, documentation gaps, and notified-body considerations.

07 / 09SIM

Modeling & test needs

Whether COMSOL, Sim4Life, bench characterization, exposure modeling, or thermal studies are justified at this stage.

08 / 09MTR

Design maturity

Whether the product is concept-, prototype-, test-, or certification-ready — or warrants re-architecture.

09 / 09UVD

UV disinfection modeling

Dose delivery, irradiance / fluence calculations, line-of-sight coverage, shadowing, geometry constraints, exposure-risk areas, material interactions, and validation planning for UV-based disinfection devices.

05Deliverables

Documentation engineering and leadership can act on the same day.

Written to stand on its own in a design review, a board update, or a regulatory discussion — without translation.

  • 01
    Technical intake & context
    Review of product concept, available drawings, architecture, power class, intended use, and constraints.
  • 02
    Wireless power risk map
    Structured map of architecture, safety, exposure, thermal, EMC, and compliance risks with severity and confidence.
  • 03
    Architecture assessment
    Evaluation of whether the current wireless power approach fits the product use case and operating envelope.
  • 04
    Safety & exposure considerations
    Initial assessment of heating, field exposure, proximity, body-contact, and misuse scenarios.
  • 05
    Regulatory readiness memo
    Likely standards basis, expected test set, documentation gaps, and notified-body considerations.
  • 06
    Modeling & test recommendations
    Where simulation (COMSOL, Sim4Life), bench testing, exposure modeling, or thermal studies are justified.
  • 07
    Executive summary
    Go / no-go / redesign recommendation written for leadership decisioning.
  • 08
    Review session
    60–90 minute walkthrough with the technical and/or leadership team. Recorded on request.
06Engagement Profile

Built for product teams where wireless power is on the program critical path.

Medical devices & body-adjacent electronics
Wearables & body-adjacent electronics
Robotics & autonomous docking
Consumer electronics
Automotive interiors & mechatronics
Industrial IoT & sealed electronics
Health & wellness devices
Hard-tech startups at prototype or pre-funding

Best fit for teams with a concrete product concept, prototype, architecture direction, or active design challenge involving wireless power. Not a fit for early ideation without a target product.

07Engagement Process

How engagements are scoped.

  1. Step 01

    Technical Intake

    The client submits product context, wireless power use case, development stage, known risks, available design materials, and key technical questions.

  2. Step 02

    Fit Review

    Beriven reviews the intake and determines whether the project appears aligned with its wireless power safety, integration, FEM modeling, EM exposure, thermal / EMC, and regulatory-readiness focus.

  3. Step 03

    Fit Call

    If aligned, Beriven conducts a short fit call to clarify the product challenge, decision timeline, available information, and likely engagement path.

  4. Step 04

    Scope Recommendation

    Beriven recommends the appropriate path: Feasibility & Risk Snapshot, Safety & Integration Review, Product-Specific FEM Electromagnetic Design Toolkit, Modeling / Compliance / Test Roadmap, longer-term Product Integration Advisory, or UV Disinfection Device Modeling & Dose Analysis.

  5. Step 05

    Scoped Proposal

    Beriven provides a proposal with deliverables, timeline, responsibilities, assumptions, and commercial terms.

08Engagement Pathways

Engagement pathways

Beriven engagements are scoped after technical intake and fit review. The appropriate path depends on product category, development stage, wireless power architecture, user proximity, safety concerns, FEM and multiphysics modeling needs, UV dose-delivery questions where applicable, regulatory context, available design information, and decision timeline.

Compliance pathwayScoped after intake

Not sure where to begin? Most product teams with an active concept or prototype start with the Safety & Integration Review. Early feasibility questions can begin with the Feasibility & Risk Snapshot.

Start here
For early feasibility questions before a full design review.
WP·01

Wireless Power Feasibility & Risk Snapshot

Early-stage screen for teams evaluating whether wireless power is viable against a candidate product and where the first risks sit.

Scope & terms
Scoped after technical intake
Discuss WP·01→
Typical content · 01
  • Technical intake questionnaire
  • One structured review call
  • Limited material review
  • High-level risk screen
  • Short written memo
  • Recommendation on whether deeper review is warranted
Core engagement
Most product teams with an active concept or prototype begin here.
WP·02
CORE ENGAGEMENT

Wireless Power Safety & Integration Review

Core engagement for teams with an active concept, prototype, or development program approaching design decisions.

Scope & terms
Scoped after technical intake
Discuss WP·02→
Typical content · 02
  • Structured technical intake
  • Design & document review
  • Discovery call
  • Architecture risk assessment
  • Safety, exposure, thermal, EMC & regulatory review
  • Modeling and test roadmap
  • Written findings brief
  • Executive / technical debrief
Specialized / next-stage support
Deeper modeling, roadmaps, advisory, and adjacent UV-device work.
WP·03

Product-Specific FEM Electromagnetic Design Toolkit

A product-specific electromagnetic modeling toolkit for teams that need repeatable design evaluation in-house.

Scope & terms
Scoped after technical intake
Discuss WP·03→
Typical content · 03
  • Product-specific FEM model setup
  • Coil, coupling, and shielding parameterization
  • Field and exposure evaluation cases
  • Thermal-relevant loss outputs
  • Documented modeling assumptions and limits
  • Handover walkthrough with the engineering team
WP·04

Modeling, Compliance & Test Roadmap

For teams approaching design freeze, certification, or notified-body review who need a defensible path to test.

Scope & terms
Scoped after technical intake
Discuss WP·04→
Typical content · 04
  • Deeper architecture review
  • Simulation and modeling plan
  • Exposure modeling strategy
  • Thermal & EMC test strategy
  • Regulatory documentation gap analysis
  • Sequenced compliance roadmap
  • Follow-up decision workshop
WP·05

Wireless Power Product Integration Advisory

Ongoing senior advisory for teams carrying wireless power through development, testing, and regulatory work.

Scope & terms
Scoped after technical intake
Discuss WP·05→
Typical content · 05
  • Embedded senior technical advisory
  • Design review participation
  • Iterative modeling and risk guidance
  • Test planning and results interpretation
  • Regulatory readiness support
  • Support through design freeze and certification
UV·01

UV Disinfection Device Modeling & Dose Analysis

Technical advisory for product teams developing UV-based disinfection systems where optical dose delivery, geometry, exposure, material interaction, thermal behavior, safety constraints, and device architecture must be understood before testing, validation, or commercialization.

Best for · Teams developing UV disinfection products for vehicle interiors, masks, enclosures, surfaces, instruments, air-flow paths, or other controlled environments.

Scope & terms
Scoped after technical intake
Discuss UV·01→
Typical content · 06
  • UV dose-delivery modeling strategy
  • Geometry and line-of-sight review
  • Exposure and shadowing risk assessment
  • Multiphysics modeling plan
  • Irradiance / fluence / dose calculation support
  • Material and surface interaction considerations
  • Safety and user-exposure concern mapping
  • Thermal and device-integration review
  • Test and validation roadmap
  • Engineering decision brief
Extended Advisory

Longer-term advisory engagements are scoped based on product complexity, development stage, modeling depth, regulatory context, and timeline.

09Scope

Defined scope. Independent findings. No certification claims.

This is an expert technical readiness review — not a certification, legal opinion, or regulatory approval. It identifies likely risks, gaps, and next-step requirements before deeper engineering, testing, or compliance work.

Included · in scope
  • Review of supplied design materials
  • Technical and regulatory risk assessment
  • One to two working calls
  • Written findings and risk map
  • Recommendation roadmap
  • Scope recommendation for next-phase support if warranted
Out of scope · unless separately scoped
  • Full electromagnetic simulation
  • Detailed coil design
  • Lab testing or witness testing
  • Formal certification
  • Production engineering
  • Regulatory submission ownership
  • Unbounded design iteration
  • Safety certification guarantee
10About Beriven

Beriven

Principal-Led Advanced Engineering Consultancy

Beriven is a principal-led advanced engineering consultancy helping organizations solve complex product development, technical integration, modeling, safety, and engineering-readiness challenges. We combine systems-level technical leadership with experienced Consulting Associates and specialized subject matter expertise, configuring focused technical teams around the requirements of each engagement.

This model gives clients access to senior technical capability while maintaining clear leadership, technical integration, and delivery accountability through Beriven.

How Beriven works

Senior expertise, configured around the problem.

01Principal Leadership

Client interface, technical direction, systems thinking, scope integration, design review, decision support, and delivery accountability.

02Consulting Associates

Experienced independent engineering professionals and specialist consulting firms contributing according to engagement requirements.

03Subject Matter Expertise

Focused deep-domain analysis, simulation, technical review, safety and regulatory-readiness insight, and specialized problem solving as needed.

Operating model
Principal Leadership
Client interface · technical direction · delivery accountability
Consulting Associates
Experienced independent engineering capability
Subject Matter Expertise
Deep-domain analysis, simulation, and specialized problem-solving
Project-specific delivery team
Assembled around the engineering problem, not a fixed staffing structure
Capabilities · technical depth

Engineering depth behind the wireless power safety and integration work.

01
Advanced engineering strategy and applied R&D direction
02
Systems engineering and multidisciplinary technical integration
03
Electromagnetic modeling, multiphysics simulation, and analysis
04
Wireless power architecture, safety, and human-exposure assessment
05
Embedded electronics and ECU / controls architecture
06
Product development and technical readiness evaluation
07
Validation strategy and manufacturing-readiness review
08
Engineering standards, governance, and IP strategy
Consulting Associates

Beriven Consulting Associates

Beriven works with experienced Consulting Associates across specialized engineering disciplines. These independent professionals and specialist consulting firms contribute to engagements according to project requirements, allowing Beriven to bring focused technical depth to complex engineering programs while maintaining a streamlined project structure.

Beriven provides the client-facing leadership, technical direction, and integration required to bring these capabilities together into a cohesive engineering effort.

Green Antenna Ltd

Consulting associate supporting antenna design and RF engineering integration.

green-antenna.com
MPHSolutions Ltd

Consulting associate for multiphysics simulations, with over 25 years of collective experience in FEA.

Principal Leadership
Aghuinyue E. Umenei, Ph.D., Principal at Beriven
Aghuinyue E. Umenei, Ph.D.
Principal | Advanced Engineering & Systems Development

Aghuinyue E. Umenei, Ph.D. is an advanced engineering leader with more than 15 years of experience spanning automotive systems, medical technology, consumer electronics, wireless power, embedded electronics, and applied R&D. His work combines systems-level engineering leadership with deep technical expertise in electromagnetic and multiphysics systems, advanced electronics, technology development, and product realization.

Across industry roles, he has led multidisciplinary advanced-development programs and technology platforms involving electronics, controls, software, mechanical systems, validation, suppliers, and external research partners. His experience includes global platform leadership, technology roadmaps, engineering governance, systems architecture, design review, validation strategy, manufacturing readiness, and the transition of emerging technologies toward product implementation.

His career across industry and collaborations with academia has exposed him to a wide range of specialists and experienced engineering professionals. The relationships and working partnerships he has built through that work are the basis for how Beriven brings Consulting Associates and subject matter expertise into engagements to solve problems alongside clients.

Dr. Umenei is a named inventor or co-inventor on more than 15 granted and pending patents and an author or co-author of more than 18 technical publications and conference presentations. His technical work includes wireless power, electromagnetic modeling and human-exposure safety, magnetic materials, medical/acoustic device technology, UV-C systems, embedded electronics, and safety-critical mechatronic platforms.

At Beriven, he provides principal-level technical leadership, helping clients frame difficult engineering problems, evaluate technical risk, establish development direction, and bring the appropriate Consulting Associates and subject matter expertise into each engagement.

15+ years advanced engineering and applied R&D
15+ granted and pending patents
18+ publications and conference presentations
Ph.D., Electrical Engineering — Cardiff University
Global multidisciplinary engineering leadership
Automotive · Medical · Consumer Electronics · Wireless Power
Engage Beriven

Start with a technical intake. Beriven reviews fit, defines the engineering question, and configures the leadership and expertise the engagement requires.

Begin technical intake
11Request a Review

Technical qualification & engagement request.

The form below captures what’s needed to scope a fit-for-purpose engagement. Share what you have — even partial information is enough to assess fit.

Form WP-INTAKE / Rev. 2026.1
Technical Qualification & Engagement Request
Private technical intake · Do not submit confidential, export-controlled, privileged, or sensitive technical information
Notice

This form is for preliminary project-fit assessment only. Submission does not create an NDA, consulting engagement, or other professional relationship. Please do not submit proprietary drawings, export-controlled data, patient information, trade secrets, or other sensitive technical information through this form.

§1 · Requester
§2 · Product

Describe the product and how wireless power is intended to function within it.

§2b · UV disinfection (if applicable)
UV topics relevant to your project
§3 · Compliance & market
§4 · Engagement

Engagements are scoped after technical intake and fit review.

Attachments · disabled

Document upload is not currently enabled. Do not send sensitive technical files through this form.

§5 · Privacy

Submissions are reviewed for fit. Beriven will respond by email, typically within two business days, if the project appears to be a fit.

12Closing

Before architecture is locked, understand what’s actually at risk.

Early wireless power decisions determine whether a product passes safety, exposure, thermal, EMC, and certification later. An independent review surfaces those risks before a redesign cycle, a re-test, or a missed certification window forces them.

Request a Wireless Power Review